混凝土攪拌機每次使用前應該且必要檢查的項目!
混凝土中科自上料攪拌機每次使用前應該且必要檢查的事項如下：
The following items should and must be checked before each use of the concrete self feeding mixer:
1、檢查攪拌機身是否平穩。
1. Check whether the mixing frame is stable.
2、攪拌機葉片及攪拌葉片支撐臂上的連接螺栓是否牢固。
2. Whether the connecting bolts on the mixer blade and the support arm of the mixing blade are firm.
3、攪拌機上料架上連接螺栓是否緊固。
3. Check whether the connecting bolts on the charging rack of the mixer are tight.
4、水泵引水是否加足，管路是否暢通。
4. Whether the water supply of water pump is sufficient and whether the pipeline is unblocked.
5、混凝土攪拌機每次使用后應該檢查的項目：
5. Items to be inspected after each use of concrete mixer:
6、清理攪拌筒內外，卸料門，料斗上的積灰，并用水沖洗干凈。
6. Clean up the dust on the inside and outside of the mixing drum, the discharge gate and hopper, and wash them with water.
7、料斗停放在運輸位置上，并將制動銷插好，料斗內不得有雜物。
7. The hopper shall be placed on the transport position and the brake pin shall be inserted properly. There shall be no foreign matters in the hopper.
8、攪拌工作結束后切斷電源，鎖好電氣控制箱。
8. After mixing, cut off the power supply and lock the electrical control box.
9、酌情對攪拌機各潤滑點加注必要的潤滑油(脂)。
9. Add necessary lubricating oil (grease) to each lubricating point of mixer as appropriate.
10、工作結束后應將供水系統內的存水全部排盡。
10. After the completion of the work, the water stored in the water supply system should be completely drained.
The above is about Zhongke since the charging mixer to check the project introduction, I believe you have understood, want to learn more about the relevant content, welcome to click consultation jbckj.cn Official website.
