當前位置：首頁 »新聞中心 » 公司新聞自上料攪拌車用車前需要檢測哪些地方？

自上料攪拌車用車前需要檢測哪些地方？

來源：http://jbckj.cn 瀏覽：0發表時間：2021-07-16

在使用自上料攪拌車的時候，很多人都不知道需要檢測哪些地方才能更加的使用攪拌車設備，這里萊州機械為您整理了攪拌車用車前要檢測的地方。

In the use of self loading mixer, many people do not know which places need to be tested in order to use the mixer more safely. Here Laizhou Machinery arranges the places to be tested before using the mixer.

確定全自動上料混凝土攪拌車的罐車處在終止情況，由于汽車發動機啟動時假如陶罐處在高速運轉方式，一瞬間便會造成很大的力，會危害減速器。

It is determined that the tank car of the full-automatic feeding concrete mixer is in the termination situation. If the ceramic pot is in the high-speed operation mode when the car engine is started, it will cause great force in a moment, which will harm the reducer.

要確保儲水箱里有充足的水，有外加劑，因各種各樣緣故的原材料過干，沒有水加放不進料時，外加劑是一根稻草。

To ensure that there is sufficient water in the water tank, there are admixtures, raw materials for various reasons are too dry, there is no water to add, put no feed, the admixture is a straw.
全自動攪拌車廠家

全自動上料攪拌器在打火前先查驗汽車機油、汽車防凍液、潤滑脂、冷卻循環水等，發覺不過關的，再再次投料。

The full-automatic feeding agitator shall check the engine oil, antifreeze, grease, cooling circulating water, etc. before ignition. If it is found that it fails, it shall be fed again.

此外也要查驗全自動上料攪拌器的燈光效果，尤其是腰燈，要保證對著輪胎邊，專題會常常亂堆建筑鋼筋等物品，并且胎邊較為弱。

In addition, we should also check the lighting effect of the automatic feeding mixer, especially the waist lamp. We should ensure that it is facing the tire edge. The topic will often pile up construction reinforcement and other items, and the tire edge is weak.

還用毛巾擦干凈了兩側的倒車鏡、窗戶玻璃，當場實時路況繁雜，光源差，視線毫無疑問要有確保。

He also wiped the reversing mirrors and window glasses on both sides with a towel. On the spot, the real-time traffic conditions were complicated, the light source was poor, and there was no doubt that the line of sight should be ensured.

車輛啟動后，讓陶罐低速檔旋轉，繞車查驗輪胎氣壓標準，是不是有漏汽胎，再用螺絲起子挑出來胎縫中的石頭。

After the vehicle starts, let the pottery pot rotate at low speed, walk around the vehicle to check the tire pressure standard, whether there is a leaking tire, and then use a screwdriver to pick out the stone in the tire gap.

感謝您的閱讀，希望以上內容對大家有所幫助！

Thank you for your reading. I hope the above content can help you!

下一篇：全自動攪拌車實心輪胎造成損壞的原因！上一篇：老司機在行駛攪拌車過程中一定要慢