中科自上料攪拌車發動機水溫過高,如何它?
由于中科自上料攪拌車是一種特殊的工作車輛，它有自己特定的工作環境，但是長時間、高強度的工作運行會在溫度過高時出現發動機水溫過高的問題，司機應該如何妥善處理?今天就和小編一起來學習吧。
As the self loading mixer is a special working vehicle, it has its own specific working environment, but long-term and high-intensity operation will cause the problem of high engine water temperature when the temperature is too high. How should the driver handle it properly? Let's learn from the editor today.
如果在一條普通的高速公路上，發動機過熱，盡可能快地減速，把車開到陰涼的地方或者涼快點的地方，然后停下來。然后打開引擎蓋，讓發動機空轉，等待發動機溫度逐漸恢復正常。此時，大部分混合器發動機的冷卻水可能嚴重不足。按規定數量補充冷卻水后，再次檢查冷卻系統，確認無其他故障，即可啟動發動機繼續行駛。
If the engine overheats on an ordinary highway, slow down as fast as possible, drive to a cool place or a cool place, and then stop. Then open the engine hood, let the engine idle and wait for the engine temperature to gradually return to normal. At this point, most mixer engines may have a serious shortage of cooling water. After replenishing the cooling water according to the specified quantity, check the cooling system again and confirm that there are no other faults, then start the engine and continue driving.
在這種情況下，還要檢查水箱百葉窗是否有異物堵塞，風機葉片的工作情況，發動機皮帶是否滑動，發動機泵的工作情況。當這些問題被確認為正常時，我們就可以正常運行了。
In this case, it is also necessary to check whether the water tank louver is blocked by foreign matters, whether the fan blades are working, whether the engine belt is sliding, and whether the engine pump is working. When these problems are confirmed as normal, we can operate normally.
以上是中科自上料攪拌車發動機水溫過高的處理方法，希望今天小編的介紹能對大家有所幫助，以后使用時能更加得心吊手。
The above is the treatment method for the high water temperature of the engine of the self feeding mixer of China Science and Technology Corporation. I hope that the introduction of today's small edition can be helpful to you, and you can use it more carefully in the future.
