全自動攪拌車使用功能與進出料事項
攪拌車用途其實很廣泛的，就是在攪拌車里攪拌好的材料運送到施工現場。下面來講講全自動攪拌車使用功能與進出料事項內容吧。
The mixer truck is actually widely used, that is, the materials mixed in the mixer truck are transported to the construction site. Now let's talk about the use function of the full-automatic mixer and the contents of the feeding and discharging matters.
攪拌車應安裝在堅實平整的地面上，防止因地面下陷發生傾倒。
The mixer truck shall be installed on a solid and flat ground to prevent dumping due to ground subsidence.
在使用作業前，應按清潔、緊固、潤滑、調整、防腐的程序檢查機器各系統，并使之符合要求；有事故隱患必須及時。
Before operation, all systems of the machine shall be checked according to the procedures of cleaning, fastening, lubrication, adjustment and corrosion prevention, and shall meet the requirements; Potential accidents must be eliminated in time.
電力驅動的攪拌車，配電設備應安裝適當?shù)娜蹟嗥骷敖拥匮b置，以確保電氣系統的。
The power distribution equipment of the electrically driven mixer truck shall be installed with appropriate fuses and grounding devices to ensure the safety of the electrical system.
全自動攪拌車在運行中，勿使砂石落人機械的運轉部分中去，否則，零件易被卡住而損壞。
During the operation of the full-automatic mixer truck, do not let the sand and gravel fall into the running part of the machine, otherwise, the parts are easy to be stuck and damaged.
進料斗升起后，斗下不得有人通過或停留。
After the feed hopper is raised, no one shall pass or stay under the hopper.
出料前不能無故停車，亦不能加料后啟動。入料量不能超過規定容量。
It is not allowed to stop without reason before discharging or start after feeding. The feeding amount shall not exceed the specified capacity.
攪拌工作結束后，要及時清洗攪拌車，防止混凝土結塊。清洗時，要防止電器設備受潮。清洗工作必須在斷電后進行，以防止觸電。
After mixing, the mixer truck shall be cleaned in time to prevent concrete from caking. During cleaning, the electrical equipment shall be protected from moisture. Cleaning must be carried out after power failure to prevent electric shock.
每次充電前用水沖洗進料口，使進料口在充電時保持濕潤；
Wash the feed port with water before each charging to keep the feed port moist during charging;
裝車的同時給隨車自帶的清洗水箱加水；
Add water to the cleaning water tank provided with the vehicle while loading;
全自動攪拌車裝料后沖洗進料口，清理進料口附近殘留的混凝土；
Wash the feed inlet after the automatic mixer truck is loaded, and clean the residual concrete near the feed inlet;
在施工現場卸料后，沖洗卸料槽，然后在混凝土儲槽中加入30-40L的清洗水；車輛返回時，保持混凝土儲罐向前緩慢轉動；
After unloading at the construction site, wash the unloading tank, and then add 30-40l of cleaning water into the concrete storage tank; When the vehicle returns, keep the concrete storage tank rotating forward slowly;
下次裝車前切記將混凝土儲罐內的污水排出；
Remember to discharge the sewage in the concrete storage tank before the next loading;
每天結束時，徹底清潔混凝土儲罐及進出口周圍。自動上料攪拌車的清潔點確保沒有水泥和混凝土結塊。
At the end of each day, thoroughly clean the concrete storage tank and the area around the inlet and outlet. The cleaning point of the automatic loading mixer ensures that there is no cement and concrete caking.
全自動攪拌車廠家提醒您，選擇攪拌車要結合生產規模的大小、施工場地的大小、配屬設備的情況、管理功能、設備的技術性能、來決定選擇攪拌車的類型，合適的產品，不但決定著工程的質量，更影響著整個工程的投資。其次還要了解供應商的信譽，更要通過各種途徑了解同類產品的、性能、質量、服務等，進行比對，從而選擇滿意的產品。
The manufacturer of full-automatic mixer truck reminds you that the type of mixer truck should be selected in combination with the size of production scale, the size of construction site, the condition of equipment, management function, and technical performance of equipment. Appropriate products not only determine the quality of the project, but also affect the investment of the whole project. Secondly, it is necessary to understand the reputation of suppliers, as well as the price, performance, quality and service of similar products through various channels, so as to select satisfactory products.
全自動攪拌車使用功能與進出料事項相關內容就講解到這里了，您可以關注我們網站jbckj.cn咨詢了解更多關于設備的使用事項。
That's all for the use functions of the automatic mixer truck and the related matters of feeding and discharging. You can follow our website www.jfjiaobanche Com for more information about the use of the device.
下一篇：攪拌車輪圈和輪胎的組合事項上一篇：自上料攪拌車驅動裝置需要多維護
