我們在使用混凝土自上料攪拌車的時候難免會出現一些問題，若是混凝土自上料攪拌車堵管了應該怎樣處理呢？下面就是混凝土自上料攪拌車廠家為大家整理的方法。

When we use the concrete self-feeding mixer truck, we will inevitably encounter some problems. What should we do if the concrete self-feeding mixer truck is blocked? The following is how the manufacturer of the concrete self-loading mixer truck sorted it out for you.

正常情況下，混凝土在泵送管道形成柱狀流體，呈懸浮狀態流動。流體表面包有一層水泥漿，水泥漿層作為一種潤滑劑與管壁接觸，骨料之間基本上不產生相對運動。當粗骨料中的某些骨料運動受阻，后面的骨料運動速度因受影響而漸漸滯緩，致使管道內粗骨料形成集結，支撐粗骨料的砂漿被擠走，余下來的間隙由小骨料填補。這樣，骨料密度增大，使該段管道內集合物沿管道徑向膨脹，水泥漿潤滑層被破壞，運動阻力增大，速度變慢，直運動停止而產生堵塞。

Under normal conditions, the concrete forms a columnar fluid in the center of the pumping pipeline and flows in a suspended state. There is a layer of cement slurry on the surface of the fluid. As a lubricant, the cement slurry layer contacts the pipe wall, and there is basically no relative movement between the aggregates. When the movement of some aggregates in the coarse aggregate is blocked, the movement speed of the subsequent aggregates will gradually slow down due to the impact, resulting in the formation of aggregates in the pipeline, the mortar supporting the coarse aggregate is squeezed out, and the remaining gap is filled by small aggregates. In this way, the aggregate density increases, which makes the aggregates in the pipeline expand radially along the pipeline, the cement slurry lubrication layer is damaged, the movement resistance increases, and the speed slows down until the movement stops, resulting in blockage.

混凝土自上料攪拌車堵管的原因：混凝土配比不良、砂的粒徑不合理、異物堵管。以上就是為您講解的問題原因了，您有什么問題就來我們網站http://jbckj.cn咨詢吧！

Reasons for pipe plugging of concrete self-feeding mixer truck: poor concrete ratio, unreasonable sand particle size, and pipe plugging by foreign matters. The above is the reason for the problem explained to you. If you have any problem, please come to our website http://jbckj.cn Ask!