當前位置：首頁 »新聞中心 » 公司新聞抽檢攪拌車設備是否合格的相關方式

抽檢攪拌車設備是否合格的相關方式

來源：http://www.jbckj.cn 瀏覽：0發表時間：2022-07-22

雖然攪拌設備的使用效果很好，但是很多時候大家還是需要注意自己的使用問題，以及固定抽查攪拌設備是或否合格的問題也要注意，下面來講講吧。

Although the mixing equipment works well, many times you still need to pay attention to your own safety problems, as well as the problem of whether the mixing equipment is qualified or not in the fixed spot check. Let's talk about it next.

抽檢攪拌設備是否合格

Spot check whether the mixing equipment is qualified

1、氣路系統：氣泵曲軸箱油位在油窗指示范圍內。氣閥氣缸必須活動，有效管路和接口不得泄漏，損壞部位必須及時糾正。油水分離器和儲氣罐內的水應每天排空，油霧器應有足夠的油。

1. Air circuit system: the oil level of the crankcase of the air pump is within the indicated range of the oil window. The air valve cylinder must move, the effective pipeline and interface must not leak, and the damaged part must be corrected in time. The water in the oil-water separator and air storage tank should be drained every day, and the oil atomizer should have enough oil.

2、水路系統：供水閥門應適當開閉，如有故障應及時清理。

2. Waterway system: the water supply valve should be properly opened and closed. If there is any fault, it should be cleaned up in time.

3、傳動系統：三角帶張緊度、鏈條松緊度、聯軸器間距正常。

3. Transmission system: the tension of V-belt, chain tightness and coupling spacing are normal.

4、攪拌系統：攪拌葉、門側板、內襯、攪拌臂是否短小損壞。攪拌機內是否有剩料，如有，應及時清理。

4. Mixing system: whether the mixing blade, door side plate, lining and mixing arm are short or damaged. Whether there is leftover material in the mixer, if any, it should be cleaned in time.

5、潤滑系統：在每個油嘴中加入足夠的潤滑脂。關鍵是軸頭的密封。檢查各箱油位，加足潤滑脂。

5. Lubrication system: add enough grease to each nozzle. The key is the sealing of the shaft head. Check the oil level of each tank and add enough grease.

6、地腳螺釘?shù)碾p頭調節螺釘?shù)墓潭菟ú坏盟蓜踊蚨搪贰?/div>

6. The fixing bolts of the double headed adjusting screws of the anchor screws shall not be loose or short circuited.
混凝土自上料攪拌車廠家

混凝土自上料攪拌車廠家認為，每個崗位上崗前都會經過嚴格的操作培訓，不僅讓工人初步了解機器的結構和原理，更重要的是讓工人有很強的意識。對于攪拌設備等大型機械設備，稍有不當操作就會對我們的生命造成威脅。

The concrete self loading mixer manufacturer believes that each post will undergo strict operation training before taking up the post, which not only allows workers to preliminarily understand the structure and principle of the machine, but also makes workers have a strong sense of safety. For large mechanical equipment such as mixing equipment, a little improper operation will pose a threat to our life safety.

關于工人操作攪拌設備不當造成人員傷亡的新聞報道很多，每隔很短的時間就有關于攪拌設備事故的報道。例如，咬傷攪拌設備腿的事故、被卡住的事故、人被卷入攪拌設備的事故等。這些事故都是由于操作人員對機器的操作不當造成的。

There are many news reports about casualties caused by improper operation of mixing equipment by workers, and there are reports about mixing equipment accidents every very short time. For example, the accident of biting the legs of the mixing equipment, the accident of being stuck, the accident of people being involved in the mixing equipment, etc. These accidents are caused by the improper operation of the machine by the operators.

建議工作人員經過培訓，注重各方面的細節，才能充分發揮攪拌設備的性能，以上的相關內容希望能夠給您一定的幫助，更多了解就來關注我們網站http://www.jbckj.cn吧！

It is suggested that the staff should receive professional training and pay attention to all aspects of details in order to give full play to the performance of the mixing equipment. I hope the above related contents can give you some help. For more information, please pay attention to our website http://www.jbckj.cn Come on!

下一篇：攪拌車上料攪拌的控制使用的方法上一篇：自上料攪拌車換季保養留意“六體系”