日韩无码熟国产纯欲_日韩精品久久久久一区二区_2021热播经典影视剧大全在线观看_这里只有精品视频在线_亚洲色欲AV无码专区在线播放_中文字幕精选无码热在线视频观看视频_男女爽到高潮的免費網站_激情人妻中文字幕_中文字幕制服亚洲另类_欧美肥胖老太bbwvideos另类

自上料攪拌車廠家直銷

品質創造未來，愛上中科聚峰造

全國咨詢熱線
400-879-1999
當前位置：首頁 »新聞中心 » 行業動態攪拌車溫度過高就需對其做好保養工作！

攪拌車溫度過高就需對其做好保養工作！

來源：http://jbckj.cn 瀏覽：0發表時間：2023-03-10
全自動攪拌車設備在操作使用過程中，會因?yàn)殚L時間不停的運轉導致其溫度有所提高，但是如果超過設備本身所能夠承受的溫度，就會導致其設備受到一定的損壞。為此，當設備溫度出現過高的時候，就需要我們對其做好相應的保養工作，下面全自動攪拌車廠家為您講解：
During the operation and use of the fully automatic mixing truck equipment, its temperature will be increased due to the non-stop operation for a long time. However, if the temperature exceeds the temperature that the equipment can withstand, the equipment will be damaged to some extent. Therefore, when the temperature of the equipment is too high, we need to do the corresponding maintenance work. The manufacturer of the automatic mixer truck will explain to you:
1、由于環境溫度比較高，因此發動機容易過熱，要加強對發動機冷卻系統的檢查、保養，這包括水箱、節溫器、水泵、風扇等部件的檢查，并且要注意及時加注冷卻水。當水溫超過100℃時，應在陰涼處停車降溫，讓發動機怠速運轉，并掀開發動機罩幫助散熱。
1. Since the ambient temperature is relatively high, the engine is easy to overheat. It is necessary to strengthen the inspection and maintenance of the engine cooling system, including the inspection of water tank, thermostat, water pump, fan and other components, and pay attention to the timely filling of cooling water. When the water temperature exceeds 100 ℃, stop in a cool place to cool down, let the engine run at idle speed, and lift the hood to help dissipate heat.
2、夏季氣溫較高，有時會超過35℃，而這樣的季節，對于一些部件有所老化的汽車來說，發生自然爆燃等的概率也高出很多。所以要做好防范準備。
2. The temperature is high in summer, sometimes exceeding 35 ℃. In this season, the probability of natural deflagration is much higher for some cars with aging parts. So be prepared for prevention.
3、車漆經過強烈的陽光曝曬，會發舊、起皺，而普通的美容打蠟雖然可以起到一定的防曬效果，但由于任何車蠟都含有矽的成分，久經紫外線照射會銹蝕車漆，留下點點黑斑。車蠟本身起不到增強硬度、抗紫外線的作用，反而會因溫度過高而很快流失，停車時要注意盡量把車停放在陰涼處。
3. The car paint will become old and wrinkled after being exposed to strong sunlight. Although ordinary beauty waxing can play a certain role in sunscreen, any car wax contains silicon, which will rust the car paint and leave black spots after being exposed to ultraviolet radiation for a long time. Car wax itself does not play the role of enhancing the hardness and anti-ultraviolet, but will quickly lose due to the high temperature. When parking, pay attention to parking the car in a cool place as far as possible.
全自動攪拌車廠家
4、氣溫高所以比較容易爆胎，溫度過高時很容易使輪胎變形，抗拉力下降。而作為輪胎本身，氣壓不標準、輪胎老化、性能減弱，或者在行駛過程中輪胎軋到了堅硬的金屬或其他硬物等情況，都會導致汽車突然間爆胎。
4. The high temperature makes it easier to burst the tire. When the temperature is too high, it is easy to deform the tire and reduce the tensile resistance. As for the tire itself, non-standard air pressure, tire aging, performance degradation, or hard metal or other hard objects rolled by the tire during driving will cause the car to burst suddenly.
5、溫度高時，機油粘度下降，抗氧化性變差，造成潤滑不良。所以要經常檢查油量油質，并及時添加或更換。要注意及時清洗機油濾清器、散熱器，保證機油暢通、散熱良好，并盡量避免發動機超負荷工作。
5. When the temperature is high, the viscosity of the oil decreases and the oxidation resistance becomes poor, resulting in poor lubrication. Therefore, it is necessary to check the quantity and quality of oil frequently and add or replace it in time. Pay attention to clean the oil filter and radiator in time to ensure smooth oil flow and good heat dissipation, and try to avoid overloading of the engine.
注意，任何的機械設備操作使用的過程中都是三分使用，七分保養，只有這樣才能夠保證設備在正常運行中的良好性能，以及延長其設備的使用壽命，希望大家能夠依照這些知識對設備進行合理的施工使用。更多攪拌車使用的相關注意事項可以隨時來我們網站http://jbckj.cn咨詢了解！
Note that any mechanical equipment should be used three times and maintained seven times during operation and use. Only in this way can the good performance of the equipment in normal operation be guaranteed and the service life of the equipment be extended. I hope you can use the equipment reasonably according to these knowledge. For more notes on the use of mixer truck, please visit our website at any time http://jbckj.cn Consult and understand!